Senior Manager / AGM / DGM - Combined Cycle Plant Engineering

The candidate should be accomplished combined cycle engineering professional with experience in following areas: 

• As engineering coordinator for min 2nos. of combined cycle power plants(preferably 3 pressure reheat configuration for F class Gas turbines)
• Optimization of parameters using GTPRO/GTMASTER or equivalent software
• Development of performance guarantee test procedure as per ASME PTC 46
• Carrying out PG test at site as per ASME PTC 46
• Generation of off-design performance correction curves
• Generation of part load performance by interacting with GT,HRSG and STG vendors
• Developing Start up and shutdown curves/procedures based on the input from the equipment manufacturers
• Specialist knowledge of one the Key equipment i.e. GTG, HRSG or STG
• Managing interfaces among various main plant manufacturers and interfaces with Civil, Electrical and Instrumentation disciplines.

Qualification – B.E. (Mechanical)

Experience – 18 – 25 Years

Handbook for Cogeneration and Combined Cycle Power Plants 

 

Srikanth Nyshadham +91-98665-06729

Sr. Manager/AGM/DGM-Design (Heat Recovery Steam Generators)

The candidate should be accomplished HRSG professional with experience in the following areas: 

• Thermal and mechanical design of HRSG (preferably 3 pressure reheat configuration for F class Gas turbines)
• Development of performance guarantee test procedure as per ASME PTC 4.4
• Carrying out PG test at site as per ASME PTC 4.4.
• Use of proprietary/commercially available software for HRSG thermal design
• Engineering of other bottoming cycle equipment like Deaerator, BFPs, Turbine bypass system and Power cycle piping.
• Managing interfaces with GTG and STG vendors
• Development of off design and part load performance.

Qualification – B.E. (Mechanical)

Experience – 18 – 25 Years

 
Srikanth Nyshadham +91-98665-06729

Basics of Boiler and HRSG Design